Clay and Concrete Tile Roof Repair and Replacement in Lindon, Utah

Tile lasts a long time because clay and concrete do not rely on protective surface granules the way asphalt shingles do. The material is also not affected by rot. The important limitation is that the waterproof underlayment underneath the tile has its own service life, so the roof can need substantial work before the tile itself is worn out.

Median year built from the US Census American Community Survey; elevation from USGS.

Tile roofing problems in Lindon often show up in two ways: obvious broken or slipped tiles, or hidden leaks below tile that still looks normal. The second situation is especially important because it can mean the waterproof layer below the tile is failing.

Flashing is especially important on a Lindon tile roof because water can travel below the tile before reaching walls, chimneys, or other transitions. Those joints need properly integrated metal and underlayment details rather than surface sealant alone.

Storms can crack or displace individual tiles in Lindon. Even when only a few pieces are visibly damaged, we inspect the underlayment and nearby flashing because impact or movement can expose the waterproof layer below.

Skylights on tile roofs need carefully integrated flashing because the tile must be cut and positioned around the opening while the underlayment and metal below still direct water safely around the frame.

A tile roof in Lindon is a layered system. The visible tile sheds most of the weather, but the roofing assembly below it provides the waterproof backup and keeps the tile positioned correctly.

• Clay tile: Clay tile is made from fired clay and is commonly chosen for its appearance and long-term durability. Individual pieces can still crack from impact or improper foot traffic.
• Concrete tile: Concrete tile is heavier than many other roofing materials and is available in several profiles and colors. The supporting structure and roof assembly need to be appropriate for the system.
• Underlayment: The underlayment below the tile provides secondary water protection. It can deteriorate before the visible tile reaches the end of its useful life.
• Battens and attachment: Depending on the tile system, tiles may be supported or positioned with battens and secured with approved fastening methods. The attachment system needs to match the tile and roof design.
• Flashing and valleys: Metal flashing and valley details direct water around walls, chimneys, roof transitions, and concentrated drainage areas.

Clay and concrete tile roofs can often be repaired without discarding every tile. On a Lindon project, we evaluate whether sound tile can be lifted, stored, and reinstalled over new underlayment, or whether the roof needs a more complete replacement.

• Ridge and hip tile repair: Loose or damaged ridge and hip pieces can expose the areas where roof planes meet. We inspect the attachment and supporting details before replacing or resetting tile.
• Broken tile replacement: Cracked, chipped, or slipped clay or concrete tiles can often be replaced individually when the surrounding roof remains in good condition.
• Valley repair: Tile valleys carry concentrated runoff and can collect debris. We inspect the metal, underlayment, and surrounding tile when a valley is leaking or draining poorly.
• Flashing repair and replacement: We rebuild flashing at walls, chimneys, roof transitions, vents, and other joints when those details are allowing water into the roofing system.
• Lift-and-relay underlayment replacement: We carefully remove reusable tiles, replace the aging underlayment below, repair approved deck damage, and reinstall the sound tile.
• Full tile roof replacement: When the existing tile is too damaged, the roof assembly is unsuitable for reuse, or the project calls for a new system, we can replace the complete clay or concrete tile roof.

Which of these your roof needs comes out of the inspection. The tiles usually outlive everything else up there, so we would rather relay yours than sell you new ones.

For the full picture of the service, see Clay & Concrete Tile Roofing.

Lift-and-relay work in Lindon focuses on preserving sound tile while renewing the waterproof layer below it. Reusing serviceable tile can avoid replacing roofing material that still has useful life.

1. Inspect without unnecessary foot trafficTile can crack when walked incorrectly, so we limit roof traffic and use appropriate access methods.
2. Separate tile damage from underlayment failureWe determine whether the leak is caused by a few broken tiles or by a broader problem underneath them.
3. Expose the hidden layersTile is lifted where needed so the underlayment, flashing, valleys, and deck can be inspected directly.
4. Rebuild the waterproof layerThe approved underlayment and flashing work is completed before sound tile is returned to place.
5. Finish with matching tile where possibleReplacement pieces are matched as closely as product availability and weathering allow.

Courtland Roofing handles tile roofing in Lindon, including broken-tile replacement, flashing and valley work, lift-and-relay underlayment replacement, and complete tile-roof replacement when needed. Our installation labor is backed by a 5-year workmanship warranty.

Certified installer for GAF, CertainTeed and Owens Corning, family-owned, licensed & insured.

Courtland Roofing has worked on tile roofs in every part of Lindon, Utah (84042 and 84062), including the streets around the Lindon Marina on Utah Lake. We give homeowners across the rest of Utah County the same service, including in Orem, Lehi and Pleasant Grove.

If you do not see your ZIP code listed, call or text us. We can confirm whether we provide clay and concrete tile roofing at your address in Lindon.