Clay and Concrete Tile Roof Repair and Replacement in Orem, Utah

Clay and concrete tile are durable roofing materials because the tile itself handles sun and weather without the same type of surface wear seen on asphalt shingles. On an Orem roof, the underlayment, flashing, valleys, and attachment details often determine when major service is needed.

Median year built from the US Census American Community Survey; elevation from USGS.

A tile roof in Orem needs attention when leaks appear under tile that still looks intact, when individual tiles crack or slip, when valleys or wall flashing begin to fail, or when the roof surface shows visible sagging. Interior staining with apparently sound tile often points to a problem below the visible surface.

Wind can loosen or displace individual clay or concrete tiles in Orem, especially at roof edges and exposed sections. The attachment method and replacement of broken or slipped pieces matter because one displaced tile can expose the underlayment below.

Storms can crack or displace individual tiles in Orem. Even when only a few pieces are visibly damaged, we inspect the underlayment and nearby flashing because impact or movement can expose the waterproof layer below.

Winter conditions can expose weak points in an Orem tile roof. Snow and ice can hold moisture against valleys and roof transitions for long periods, so the underlayment and flashing underneath the tile need to remain dependable.

A tile roof in Orem is a layered system. The visible tile sheds most of the weather, but the roofing assembly below it provides the waterproof backup and keeps the tile positioned correctly.

• Clay tile: Clay tile is made from fired clay and is commonly chosen for its appearance and long-term durability. Individual pieces can still crack from impact or improper foot traffic.
• Concrete tile: Concrete tile is heavier than many other roofing materials and is available in several profiles and colors. The supporting structure and roof assembly need to be appropriate for the system.
• Underlayment: The underlayment below the tile provides secondary water protection. It can deteriorate before the visible tile reaches the end of its useful life.
• Battens and attachment: Depending on the tile system, tiles may be supported or positioned with battens and secured with approved fastening methods. The attachment system needs to match the tile and roof design.
• Flashing and valleys: Metal flashing and valley details direct water around walls, chimneys, roof transitions, and concentrated drainage areas.

Clay and concrete tile roofs can often be repaired without discarding every tile. On an Orem project, we evaluate whether sound tile can be lifted, stored, and reinstalled over new underlayment, or whether the roof needs a more complete replacement.

• Lift-and-relay underlayment replacement: We carefully remove reusable tiles, replace the aging underlayment below, repair approved deck damage, and reinstall the sound tile.
• Broken tile replacement: Cracked, chipped, or slipped clay or concrete tiles can often be replaced individually when the surrounding roof remains in good condition.
• Flashing repair and replacement: We rebuild flashing at walls, chimneys, roof transitions, vents, and other joints when those details are allowing water into the roofing system.
• Valley repair: Tile valleys carry concentrated runoff and can collect debris. We inspect the metal, underlayment, and surrounding tile when a valley is leaking or draining poorly.
• Ridge and hip tile repair: Loose or damaged ridge and hip pieces can expose the areas where roof planes meet. We inspect the attachment and supporting details before replacing or resetting tile.
• Full tile roof replacement: When the existing tile is too damaged, the roof assembly is unsuitable for reuse, or the project calls for a new system, we can replace the complete clay or concrete tile roof.

Which of these your roof needs comes out of the inspection. The tiles usually outlive everything else up there, so we would rather relay yours than sell you new ones.

For the full picture of the service, see Clay & Concrete Tile Roofing.

Lift-and-relay work in Orem focuses on preserving sound tile while renewing the waterproof layer below it. Reusing serviceable tile can avoid replacing roofing material that still has useful life.

1. Map the leak before lifting tileWe use the interior evidence, valleys, walls, and roof transitions to narrow down where the problem is likely occurring.
2. Lift the affected tile carefullyRemoving the tile exposes the underlayment and flashing without creating unnecessary damage to reusable pieces.
3. Repair the hidden roofing layersFailed underlayment, flashing, battens, or damaged wood are addressed according to the approved scope.
4. Replace broken tileUnusable pieces are replaced with the closest available match before the roof is put back together.
5. Inspect the finished sectionWe review the repaired area and adjacent drainage paths before the work is considered complete.

Homeowners in Orem can call Courtland Roofing for clay and concrete tile work. We are family-owned, licensed, and insured, and our approach starts with determining whether the tile itself has failed or whether the waterproofing underneath it is the real problem.

Certified installer for GAF, CertainTeed and Owens Corning, family-owned, licensed & insured.

Courtland Roofing has worked on tile roofs in every part of Orem, Utah (84057, 84058 and 84097), including the streets around Utah Valley University. We give homeowners across the rest of Utah County the same service, including in Spanish Fork, Springville and American Fork.

If you do not see your ZIP code listed, call or text us. We can confirm whether we provide clay and concrete tile roofing at your address in Orem.