Clay and Concrete Tile Roof Repair and Replacement in Hooper, Utah

Clay and concrete tile can remain in service for many years because clay and concrete do not rely on a surface layer of mineral granules, but the underlayment and flashing below may need replacement sooner.

Median year built from the US Census American Community Survey; elevation from USGS.

A tile roof should be evaluated when individual tiles move, flashing fails, valleys hold debris or water reaches the home, because the repair depends on whether the problem is isolated or extends into the waterproofing below.

Flashing is especially important on a tile roof in Hooper because water can travel beneath the pieces toward walls, chimneys and other transitions, so those joints need integrated metal and underlayment details.

Clay and concrete roofing responds to sun differently because the tile surface does not shed protective granules, although heat still contributes to aging below the tile.

A tile roof can show its first leak through interior or attic staining rather than obvious damage to the visible pieces, which guides the inspection toward the most likely underlayment or flashing problem.

A tile roof combines an outer layer of clay or concrete tile with underlayment, attachment details and flashing underneath.

• Clay tile: Clay tile is made from fired clay and can remain usable for many years, but individual pieces can still crack from impact or careless walking.
• Concrete tile: Concrete tile is a heavier roofing option that comes in multiple shapes and finishes, so the supporting roof structure needs to be suitable for the selected system.
• Underlayment: Underlayment protects the roof deck when water reaches beneath the visible pieces, and it can wear out before the clay or concrete pieces need replacement.
• Battens and attachment: Some tile systems use horizontal battens as part of the support system, and the attachment method must match the tile profile and roof design.
• Flashing and valleys: Flashing guides water away from joints where the tile surface changes direction, and damaged or poorly integrated flashing can leak even when nearby tile remains intact.

Tile-roof work can range from rebuilding one failed flashing detail to renewing the underlayment below a large section of reusable tile, so we separate isolated tile damage from broader underlayment failure.

• Broken tile replacement: When damage is limited to isolated chips or cracks, we replace only the affected tiles, and replacement pieces are matched as closely as current materials allow.
• Flashing repair and replacement: When flashing fails around roof-to-wall transitions, we rebuild the affected metal and waterproofing details, so the repair controls water above and below the tile.
• Valley repair: For a leaking or poorly draining valley, we remove debris and inspect the drainage path beneath the surrounding pieces, so water can move through the roof intersection without backing up beneath the tile.
• Ridge and hip tile repair: When ridge or hip pieces move out of position, we inspect the attachment and reset or replace the affected pieces, and surrounding tile is checked for related damage.
• Lift-and-relay underlayment replacement: We remove suitable original pieces without unnecessary handling, then replace worn underlayment and rebuild flashing where needed before the roof keeps suitable original tile over a renewed water barrier.
• Full tile roof replacement: Full replacement makes sense when repair or lift-and-relay work would not provide a dependable result, and the new underlayment, flashing, attachment details and tile are installed as one system.

Which of these your roof needs comes out of the inspection. The tiles usually outlive everything else up there, so we would rather relay yours than sell you new ones.

For the full picture of the service, see Clay & Concrete Tile Roofing.

Lift-and-relay underlayment replacement preserves reusable tile while rebuilding the hidden waterproofing and flashing, which lets us inspect the exposed wooden roof deck directly.

1. Lift and organize the tileWe take up tile that can be saved, and damaged pieces are kept out of the reinstall pile.
2. Remove the old underlaymentAfter the tile is removed, we strip deteriorated underlayment from the roof deck, so the wooden roof deck and older flashing can be inspected directly.
3. Repair damaged woodIf we find roof-deck areas that are no longer sound, we photograph the affected area and explain the added repair before covering the area with new underlayment.
4. Install new tile-compatible underlaymentWe install new underlayment suited to the tile roofing system and tie it into valleys and flashing at roof transitions.
5. Relay the tileAfter the waterproofing is complete, we relay the preserved clay or concrete pieces, and replace broken pieces as closely as current materials allow.

Courtland Roofing works on clay and concrete tile roofs throughout Hooper, from individual broken-tile repairs to broader underlayment replacement and complete reroofing when needed.

Certified installer for GAF, CertainTeed and Owens Corning, family-owned, licensed & insured.

Courtland Roofing has worked on tile roofs in every part of Hooper, Utah (84315), including the streets around the Great Salt Lake shoreline. We give homeowners across the rest of Weber County the same service, including in West Haven, Marriott-Slaterville and Uintah.

If you do not see your ZIP code listed, call or text us. We can confirm whether we provide clay and concrete tile roofing at your address in Hooper.