Clay and Concrete Tile Roof Repair and Replacement in North Ogden, Utah

Clay and concrete tile can remain in service for many years because the durable surface pieces can stay in service through repeated weather exposure, but hidden roofing layers often determine when major work becomes necessary.

Median year built from the US Census American Community Survey; elevation from USGS.

A tile roof should be evaluated when visible pieces are damaged or leaks suggest a problem with the waterproofing below, because the next step is to identify whether the tile, flashing, valley or underlayment is actually failing.

Wind can loosen or shift individual clay or concrete tiles in North Ogden, especially near exposed roof edges, so secure attachment and prompt replacement of damaged pieces help keep the underlayment covered.

Flashing is especially important on a tile roof in North Ogden because water can travel beneath the pieces toward walls, chimneys and other transitions, so those joints need integrated metal and underlayment details.

Interior or attic water stains can reveal a tile-roof leak even when the visible tile still looks normal, and we do not assume the tile directly above the stain is the source.

A tile roof combines a hard tile surface made from clay or concrete with hidden waterproofing and metal details at valleys and transitions.

• Clay tile: Clay tile is made from fired clay and creates a durable roof covering with a traditional tile appearance, but individual tiles can still crack, chip or move out of position.
• Concrete tile: Concrete tile is a heavier residential roofing material offered in different profiles, so the chosen profile and attachment method need to fit the structure below.
• Underlayment: Underlayment protects the supporting wood beneath the outer roofing pieces, and this layer deserves attention on an aging tile roof.
• Battens and attachment: Some tile systems include battens beneath the tile as part of the installation, and the roof slope, tile profile and product requirements all affect the attachment plan.
• Flashing and valleys: Flashing forms the metal water-control details at valleys and other vulnerable joints, and each joint must move water away without creating a path to the roof deck.

Tile-roof work can range from replacing isolated broken pieces to completing broader waterproofing and flashing work, so the recommendation considers both the tile and waterproofing below.

• Broken tile replacement: When damage is limited to one small section of damaged tile, we repair the visible damage without disturbing unaffected tile, and we look at the waterproof layer directly below the damaged pieces.
• Flashing repair and replacement: When flashing fails around transitions where water is entering, we restore the flashing and integrate it with the waterproof layer below, so the surrounding tile and waterproofing remain part of the final repair.
• Valley repair: For a leaking or poorly draining valley, we rebuild the affected valley detail after identifying the leak source, so the valley is checked for clear drainage before the repair is complete.
• Ridge and hip tile repair: When ridge or hip pieces need replacement after impact or weather damage, we replace broken pieces and correct the attachment below, and the repair addresses why the piece moved, not only its position.
• Lift-and-relay underlayment replacement: We lift reusable pieces and protect them during the waterproofing work, then repair the hidden roofing layers that no longer keep water out before returning the preserved pieces to the roof.
• Full tile roof replacement: Full replacement makes sense when the structure or roofing layout requires a broader rebuild, and the complete new tile roof includes renewed waterproofing and drainage details.

Which of these your roof needs comes out of the inspection. The tiles usually outlive everything else up there, so we would rather relay yours than sell you new ones.

For the full picture of the service, see Clay & Concrete Tile Roofing.

Lift-and-relay underlayment replacement preserves reusable tile while rebuilding the waterproofing underneath, which lets us confirm the new waterproofing starts over a sound surface.

1. Lift and organize the tileWe open the roof by removing tile that can be reused, and pieces that cannot be reused are separated for replacement.
2. Remove the old underlaymentAfter the tile is removed, we remove the old underlayment and expose the roof deck, so the replacement system can start over a properly inspected surface.
3. Repair damaged woodIf we find damaged supporting wood below the roofing layers, we document the condition while the wood is still visible before the repaired area is covered again.
4. Install new tile-compatible underlaymentWe install the new water barrier needed beneath the tile surface and make the waterproofing continuous around openings and changes in roof direction.
5. Relay the tileAfter the waterproofing is complete, we reinstall the saved tile over the new underlayment, and replace only the pieces that could not be reused.

Courtland Roofing provides clay and concrete tile roofing in North Ogden, including repairs to individual pieces, flashing and valleys, underlayment replacement and complete roof replacement when necessary.

Certified installer for GAF, CertainTeed and Owens Corning, family-owned, licensed & insured.

Courtland Roofing has worked on tile roofs in every part of North Ogden, Utah (84414 and 84404), including the streets around Ben Lomond Peak. We give homeowners across the rest of Weber County the same service, including in Harrisville, Plain City and West Haven.

If you do not see your ZIP code listed, call or text us. We can confirm whether we provide clay and concrete tile roofing at your address in North Ogden.