Clay and Concrete Tile Roof Repair and Replacement in Eden, Utah

Clay and concrete tile can remain in service for many years because the clay or concrete surface is built for long-term weather exposure, but the underlayment below can wear out sooner than the visible tile.

Median year built from the US Census American Community Survey; elevation from USGS.

A tile roof should be evaluated when pieces break, water enters near a transition or repairs keep returning in different areas, because a leak can come from one damaged piece or from a larger problem below the tile.

Tile valleys in Eden carry concentrated runoff, so debris, broken pieces or damaged valley details can slow drainage and expose the underlayment to moisture.

Storms can crack or shift individual tiles in Eden, and we inspect the nearby underlayment and flashing when visible damage may have exposed the waterproof layer below.

Wind can loosen or shift individual clay or concrete tiles in Eden, especially near exposed roof edges, so secure attachment and prompt replacement of damaged pieces help keep the underlayment covered.

A tile roof combines the visible roofing pieces that create the finished roof with attachment, waterproofing and drainage details beneath the surface.

• Clay tile: Clay tile is made from fired clay and can preserve its appearance and function for a long time, but the hard surface is not immune to impact damage.
• Concrete tile: Concrete tile is a cement-based roof material designed in several profiles and colors, so the home must be appropriate for the product being installed.
• Underlayment: Underlayment protects the roof deck below the visible roofing material, and the tile above may remain usable long after this layer begins to age.
• Battens and attachment: Some tile systems use battens or mechanical fasteners to keep tile positioned correctly, and the support and fastening details need to keep the tile secure without blocking drainage.
• Flashing and valleys: Flashing helps keep water out at valleys, walls, chimneys and other transitions, and we check these locations closely when water is entering near a joint.

Tile-roof work can range from correcting one local leak source to renewing the hidden waterproofing beneath much of the roof, so the proposed work matches the part of the roofing system that failed.

• Broken tile replacement: When damage is limited to a few pieces that have moved out of position, we replace the damaged tiles and leave the surrounding roof intact, and reusable original tile around the repair stays in place.
• Flashing repair and replacement: When flashing fails around tile-to-wall connections, we rebuild the failed transition with properly integrated flashing, so water cannot continue traveling beneath the tile at that location.
• Valley repair: For a leaking or poorly draining valley, we check for debris, damaged metal and broken tile around the valley, so debris and damaged materials no longer interfere with the water path.
• Ridge and hip tile repair: When ridge or hip pieces show visible movement or damage, we restore the supporting detail before the cap tile goes back, and replacement pieces are matched as closely as availability allows.
• Lift-and-relay underlayment replacement: We remove tile that can be saved and keep damaged pieces separate, then replace aging underlayment and correct failed flashing details before broken pieces are replaced and usable tile is reinstalled.
• Full tile roof replacement: Full replacement makes sense when the current materials cannot reasonably be preserved, and the replacement scope matches the full extent of the failure.

Which of these your roof needs comes out of the inspection. The tiles usually outlive everything else up there, so we would rather relay yours than sell you new ones.

For the full picture of the service, see Clay & Concrete Tile Roofing.

Lift-and-relay underlayment replacement preserves reusable tile while rebuilding the materials that protect the wooden roof deck, which lets us correct hidden problems before the roof is closed again.

1. Lift and organize the tileWe take up reusable clay or concrete tile, and replacement needs become clear before the later relay.
2. Remove the old underlaymentAfter the tile is removed, we take up deteriorated waterproofing from the work area, so we can inspect valleys, flashing and supporting materials below.
3. Repair damaged woodIf we find deteriorated roof-deck material, we document the affected wood and explain the repair before installing new wood.
4. Install new tile-compatible underlaymentWe install tile-compatible underlayment across the rebuilt section and finish the drainage details that protect the roof deck below.
5. Relay the tileAfter the waterproofing is complete, we finish by reinstalling the pieces that were saved, and inspect the completed area.

In Eden, Courtland Roofing provides broken-tile repair, flashing and valley work, lift-and-relay underlayment replacement and complete tile-roof replacement when the existing system cannot be reused.

Certified installer for GAF, CertainTeed and Owens Corning, family-owned, licensed & insured.

Courtland Roofing has worked on tile roofs in every part of Eden, Utah (84310), including the streets around Powder Mountain and Pineview Reservoir. We give homeowners across the rest of Weber County the same service, including in Marriott-Slaterville, Uintah and Huntsville.

If you do not see your ZIP code listed, call or text us. We can confirm whether we provide clay and concrete tile roofing at your address in Eden.