Metal Roofing Installation in Midvale, Utah

A properly laid-out metal roof creates a continuous path for water to move down the roof; the roof still needs well-built transitions because water can enter where panels meet walls, valleys, ridges or openings.

Median year built from the US Census American Community Survey; elevation from USGS.

Metal often fits homeowners who plan to keep the property and value the appearance or maintenance characteristics of a panel roof; the economics can be less favorable on short-term ownership or highly complicated roof layouts.

Metal panels can perform well while a poorly detailed valley, wall or edge still leaks; each transition needs a metal detail that carries runoff through the change in roof direction.

Hail performance varies from one metal panel system to another; the result depends on panel profile, metal thickness, coating, support beneath the panel and hail size.

The smooth panel surface sends rain and melting snow toward the lower roof details efficiently; valleys, gutters and lower edges have to be designed so runoff keeps moving off the roof.

Metal panels form the outer roof surface, with several other materials working below and around them; each hidden component must work with water flow and the expansion and contraction of the panels.

• Metal panels: The metal panels make up the main weather-facing surface; panel width, profile, seam type, gauge and coating differ by product line.
• Underlayment: A compatible underlayment goes between the wooden roof deck and the metal panels as secondary protection, with the material chosen to match the metal system and project needs.
• Clips or fasteners: Standing-seam panels typically rely on clips or fasteners beneath the panels, while exposed-fastener roofing leaves screws and sealing washers visible.
• Seams: Each seam joins one metal panel to the next, and a standing-seam design keeps that joint raised above the broad panel surface.
• Flashing and trim: Metal trim and flashing route water around valleys, ridges, walls, chimneys and roof edges to keep runoff moving through areas where roof surfaces meet.
• Closures and sealants: Specific metal-roof connections may need shaped closures or sealants specified for the system to protect specific joints from wind-driven water and debris.

For a residential roof in Midvale, standing seam is usually the premium metal option; exposed-fastener panels can suit simpler or budget-driven projects where visible fasteners are acceptable.

• Standing seam: With standing seam, the roof has raised panel seams with concealed attachment to keep most primary fasteners out of the weather.
• Exposed-fastener panels: These panels fasten through the visible surface with screws and sealing washers, so the simpler attachment can reduce upfront cost while screws and washers require inspection over time.
• Metal roof accents: A project can use metal for porches, bays, dormers and other smaller roof sections when the design calls for metal on a smaller portion of the home.

A complete project includes the supporting surface as well as the finished metal; we prepare the supporting roof, install compatible protection and attachment, then finish the panels and water-control details.

• Finish ridges and roof edges: We finish the roof with ridge caps, eave and rake trim, closures and related edge pieces so exposed panel edges and ridge lines are properly finished.
• Inspect the wooden roof deck: We inspect the wooden roof deck after the existing roofing is removed; we explain the repair and cost before replacing wood that needs attention.
• Plan snow retention where needed: If sliding snow could fall onto frequently used areas below the eaves, we review snow-retention options before the installation is finalized.
• Use compatible underlayment: The underlayment is chosen to work with the metal panels and roof assembly; the material must remain suitable for conditions beneath the metal surface.
• Build valleys and wall transitions: We build water-control flashing through valleys and where the roof meets walls or chimneys so those transitions do not depend on surface caulk to stay dry.
• Detail roof openings: Every vent, pipe, skylight and similar roof opening needs properly fitted metal flashing so the opening does not become a path for water.
• Plan for expansion and contraction: Metal roofing changes dimension as temperatures rise and fall, and the installation needs to accommodate that movement at clips, fasteners and trim.

Metal rewards careful work at the transitions more than any other roofing material. The panels are the straightforward part; the valleys, ridges and wall joints are what decide whether the roof reaches its lifespan.

For the full picture of the service, see Metal Roofing.

We establish the panel layout before preparing the roof for installation; the roof is then prepared in sequence before the panels, edges, seams and openings are finished.

1. Inspect and measure the roofWe inspect and measure the existing roof, its slopes, openings, valleys and planned panel lengths before finalizing the metal-roof layout.
2. Prepare the wooden roof deckWe check and prepare the roof deck for damage or uneven areas and explain any necessary repair before completing extra work.
3. Install underlayment and water-control detailsWe put in place underlayment and water-control details around the roof's lower edges and transitions before panel installation begins.
4. Install panels with room for movementWe lay out and secure the panels with the attachment method specified for the system while allowing normal expansion and contraction.
5. Finish flashing, trim, and roof openingsWe complete the remaining flashing and trim around the roof's major transitions, then inspect the finished roof.

Homeowners in Midvale can use Courtland Roofing for residential metal-roof installation from a family-owned, licensed and insured company with a 5-year workmanship warranty.

Certified installer for GAF, CertainTeed and Owens Corning, family-owned, licensed & insured.

Courtland Roofing has installed metal roofs in every part of Midvale, Utah (84047), and we would be glad to look at yours. We give homeowners across the rest of Salt Lake County the same service, including in Sandy, South Jordan and Taylorsville.

If you do not see your ZIP code listed, call or text us. We can confirm whether we provide metal roofing at your address in Midvale.