Clay and Concrete Tile Roof Repair and Replacement in Uintah, Utah

Tile roofing can outlast many of the components underneath it. The clay or concrete pieces shed weather and protect the roof surface, but water that gets past them still relies on the underlayment and flashing below. That difference is why tile roofs often need lift-and-relay work instead of complete tile replacement.

Median year built from the US Census American Community Survey; elevation from USGS.

Schedule a tile-roof evaluation in Uintah when you see cracked or displaced tiles, recurring leaks, damaged ridge pieces, loose flashing, debris-filled valleys, or staining inside the home. The inspection should determine whether the problem is limited to a few tiles or whether the underlayment below a larger section has deteriorated.

Storms can crack or displace individual tiles in Uintah. Even when only a few pieces are visibly damaged, we inspect the underlayment and nearby flashing because impact or movement can expose the waterproof layer below.

Interior and attic staining can reveal a tile-roof problem that is not obvious from above. Water may travel beneath several tiles before reaching the wooden roof deck, so the interior evidence helps narrow down the damaged underlayment or flashing area.

Flashing is especially important on a Uintah tile roof because water can travel below the tile before reaching walls, chimneys, or other transitions. Those joints need properly integrated metal and underlayment details rather than surface sealant alone.

A tile roof in Uintah is a layered system. The visible tile sheds most of the weather, but the roofing assembly below it provides the waterproof backup and keeps the tile positioned correctly.

• Clay tile: Clay tile is made from fired clay and is commonly chosen for its appearance and long-term durability. Individual pieces can still crack from impact or improper foot traffic.
• Concrete tile: Concrete tile is heavier than many other roofing materials and is available in several profiles and colors. The supporting structure and roof assembly need to be appropriate for the system.
• Underlayment: The underlayment below the tile provides secondary water protection. It can deteriorate before the visible tile reaches the end of its useful life.
• Battens and attachment: Depending on the tile system, tiles may be supported or positioned with battens and secured with approved fastening methods. The attachment system needs to match the tile and roof design.
• Flashing and valleys: Metal flashing and valley details direct water around walls, chimneys, roof transitions, and concentrated drainage areas.

Courtland Roofing works on both clay and concrete tile roofs in Uintah. Most tile work falls into a few categories: lift-and-relay underlayment replacement, broken-tile replacement, flashing and valley repair, and full tile-roof replacement when the existing tile or roof assembly can no longer be reused.

• Valley repair: Tile valleys carry concentrated runoff and can collect debris. We inspect the metal, underlayment, and surrounding tile when a valley is leaking or draining poorly.
• Broken tile replacement: Cracked, chipped, or slipped clay or concrete tiles can often be replaced individually when the surrounding roof remains in good condition.
• Flashing repair and replacement: We rebuild flashing at walls, chimneys, roof transitions, vents, and other joints when those details are allowing water into the roofing system.
• Ridge and hip tile repair: Loose or damaged ridge and hip pieces can expose the areas where roof planes meet. We inspect the attachment and supporting details before replacing or resetting tile.
• Lift-and-relay underlayment replacement: We carefully remove reusable tiles, replace the aging underlayment below, repair approved deck damage, and reinstall the sound tile.
• Full tile roof replacement: When the existing tile is too damaged, the roof assembly is unsuitable for reuse, or the project calls for a new system, we can replace the complete clay or concrete tile roof.

Which of these your roof needs comes out of the inspection. The tiles usually outlive everything else up there, so we would rather relay yours than sell you new ones.

For the full picture of the service, see Clay & Concrete Tile Roofing.

Lift-and-relay work in Uintah focuses on preserving sound tile while renewing the waterproof layer below it. Reusing serviceable tile can avoid replacing roofing material that still has useful life.

1. Lift and organize the tileReusable tile is removed carefully and stored so sound pieces can be reinstalled.
2. Remove the old underlaymentOnce the tile is out of the way, the aging waterproof layer is removed so the wooden roof deck and old flashing can be inspected.
3. Repair approved deck damageSoft or damaged wood is documented and replaced as part of the approved additional work.
4. Install new tile-compatible underlaymentA compatible underlayment system is installed with the flashing and valley details needed for the tile roof.
5. Relay the tileSound original tile is reinstalled, and broken or unusable pieces are replaced as closely as available materials allow.

Homeowners in Uintah can call Courtland Roofing for clay and concrete tile work. We are family-owned, licensed, and insured, and our approach starts with determining whether the tile itself has failed or whether the waterproofing underneath it is the real problem.

Certified installer for GAF, CertainTeed and Owens Corning, family-owned, licensed & insured.

Courtland Roofing has worked on tile roofs in every part of Uintah, Utah (84405 and 84403), and we would be glad to look at yours. We give homeowners across the rest of Weber County the same service, including in Ogden, Roy and North Ogden.

If you do not see your ZIP code listed, call or text us. We can confirm whether we provide clay and concrete tile roofing at your address in Uintah.