Clay and Concrete Tile Roof Repair and Replacement in Marriott-Slaterville, Utah

Clay and concrete tile can remain in service for many years because clay and concrete do not rely on a surface layer of mineral granules, but the underlayment below can wear out sooner than the visible tile.

Median year built from the US Census American Community Survey; elevation from USGS.

A tile roof should be evaluated when individual tiles move, flashing fails, valleys hold debris or water reaches the home, because a leak can come from one damaged piece or from a larger problem below the tile.

Winter conditions can expose weak points in a tile roof in Marriott-Slaterville because snow and ice hold moisture near valleys and transitions, making dependable underlayment and flashing especially important.

Wind can loosen or shift individual clay or concrete tiles in Marriott-Slaterville, especially near exposed roof edges, so secure attachment and prompt replacement of damaged pieces help keep the underlayment covered.

Interior water marks can help trace a tile-roof problem because the entry point may be away from the stain itself, and we do not assume the tile directly above the stain is the source.

A tile roof combines an outer layer of clay or concrete tile with attachment, waterproofing and drainage details beneath the surface.

• Clay tile: Clay tile is made from fired clay and can remain usable for many years, but the hard surface is not immune to impact damage.
• Concrete tile: Concrete tile is a heavier roofing option that comes in multiple shapes and finishes, so the home must be appropriate for the product being installed.
• Underlayment: Underlayment protects the roof deck when water reaches beneath the visible pieces, and the tile above may remain usable long after this layer begins to age.
• Battens and attachment: Some tile systems use horizontal battens as part of the support system, and the support and fastening details need to keep the tile secure without blocking drainage.
• Flashing and valleys: Flashing guides water away from joints where the tile surface changes direction, and we check these locations closely when water is entering near a joint.

Tile-roof work can range from rebuilding one failed flashing detail to renewing the hidden waterproofing beneath much of the roof, so we avoid replacing usable roofing material without a reason.

• Broken tile replacement: When damage is limited to isolated chips or cracks, we replace the damaged tiles and leave the surrounding roof intact, and the repaired area is inspected before the work is complete.
• Flashing repair and replacement: When flashing fails around roof-to-wall transitions, we rebuild the failed transition with properly integrated flashing, so the joint no longer depends on surface sealant alone.
• Valley repair: For a leaking or poorly draining valley, we remove debris and inspect the drainage path beneath the surrounding pieces, so debris and damaged materials no longer interfere with the water path.
• Ridge and hip tile repair: When ridge or hip pieces move out of position, we restore the supporting detail before the cap tile goes back, and the finished ridge or hip can shed water as intended.
• Lift-and-relay underlayment replacement: We remove suitable original pieces without unnecessary handling, then replace aging underlayment and correct failed flashing details before reinstalling the original tile.
• Full tile roof replacement: Full replacement makes sense when repair or lift-and-relay work would not provide a dependable result, and the replacement scope matches the full extent of the failure.

Which of these your roof needs comes out of the inspection. The tiles usually outlive everything else up there, so we would rather relay yours than sell you new ones.

For the full picture of the service, see Clay & Concrete Tile Roofing.

Lift-and-relay underlayment replacement preserves reusable tile while rebuilding the hidden waterproofing and flashing, which lets us correct hidden problems before the roof is closed again.

1. Lift and organize the tileWe take up tile that can be saved, and replacement needs become clear before the later relay.
2. Remove the old underlaymentAfter the tile is removed, we strip deteriorated underlayment from the roof deck, so we can inspect valleys, flashing and supporting materials below.
3. Repair damaged woodIf we find roof-deck areas that are no longer sound, we document the affected wood and explain the repair before continuing with the roofing installation.
4. Install new tile-compatible underlaymentWe install new underlayment suited to the tile roofing system and finish the drainage details that protect the roof deck below.
5. Relay the tileAfter the waterproofing is complete, we relay the preserved clay or concrete pieces, and inspect the completed area.

Courtland Roofing works on clay and concrete tile roofs throughout Marriott-Slaterville, from individual broken-tile repairs to broader underlayment replacement and complete reroofing when needed.

Certified installer for GAF, CertainTeed and Owens Corning, family-owned, licensed & insured.

Courtland Roofing has worked on tile roofs in every part of Marriott-Slaterville, Utah (84404), and we would be glad to look at yours. We give homeowners across the rest of Weber County the same service, including in South Ogden, Riverdale and Pleasant View.

If you do not see your ZIP code listed, call or text us. We can confirm whether we provide clay and concrete tile roofing at your address in Marriott-Slaterville.