Clay and Concrete Tile Roof Repair and Replacement in Liberty, Utah

Clay and concrete tile can remain in service for many years because tile does not age through granule loss the way asphalt shingles do, but the underlayment and flashing below may need replacement sooner.

Median year built from the US Census American Community Survey; elevation from USGS.

A tile roof should be evaluated when tile shifts, leaks recur, flashing separates or water staining appears inside, because the repair depends on whether the problem is isolated or extends into the waterproofing below.

Storms can crack or shift individual tiles in Liberty, and we inspect the nearby underlayment and flashing when visible damage may have exposed the waterproof layer below.

Water can move beneath several tiles before reaching the roof deck, so interior staining can help narrow down the source, and that helps us compare the stain location with valleys, walls and roof transitions above.

Tile valleys in Liberty carry concentrated runoff, so debris, broken pieces or damaged valley details can slow drainage and expose the underlayment to moisture.

A tile roof combines the exposed tile that takes most sun, rain and snow with underlayment, attachment details and flashing underneath.

• Clay tile: Clay tile is made from fired clay and resists the type of surface wear seen on asphalt shingles, but individual pieces can still crack from impact or careless walking.
• Concrete tile: Concrete tile is a molded cement-based roofing product with several style options, so the supporting roof structure needs to be suitable for the selected system.
• Underlayment: Underlayment creates a continuous water barrier below the tile surface, and it can wear out before the clay or concrete pieces need replacement.
• Battens and attachment: Some tile systems use battens to establish the tile layout across the roof, and the attachment method must match the tile profile and roof design.
• Flashing and valleys: Flashing manages water where the roof changes direction or meets an opening, and damaged or poorly integrated flashing can leak even when nearby tile remains intact.

Tile-roof work can range from addressing one damaged roof transition to renewing the underlayment below a large section of reusable tile, so we focus on what can be preserved and what needs rebuilding.

• Broken tile replacement: When damage is limited to a limited number of broken pieces, we replace only the affected tiles, and additional pieces are replaced only when the inspection shows damage.
• Flashing repair and replacement: When flashing fails around metal joints around chimneys and walls, we rebuild the affected metal and waterproofing details, so the repaired transition works with the underlayment below.
• Valley repair: For a leaking or poorly draining valley, we inspect the valley and nearby tile for damage that interferes with drainage, so water can move through the roof intersection without backing up beneath the tile.
• Ridge and hip tile repair: When ridge or hip pieces separate from the supporting detail, we inspect the attachment and reset or replace the affected pieces, and the material beneath the cap tile is checked at the same time.
• Lift-and-relay underlayment replacement: We preserve suitable original tile while opening the roof below, then replace worn underlayment and rebuild flashing where needed before the finished roof combines renewed waterproofing with reusable tile.
• Full tile roof replacement: Full replacement makes sense when the existing roof is not a good candidate for a smaller repair, and the new underlayment, flashing, attachment details and tile are installed as one system.

Which of these your roof needs comes out of the inspection. The tiles usually outlive everything else up there, so we would rather relay yours than sell you new ones.

For the full picture of the service, see Clay & Concrete Tile Roofing.

Lift-and-relay underlayment replacement preserves reusable tile while replacing deteriorated underlayment and affected flashing, which lets us inspect the exposed wooden roof deck directly.

1. Lift and organize the tileWe carefully lift original pieces that remain in good condition, and damaged pieces are kept out of the reinstall pile.
2. Remove the old underlaymentAfter the tile is removed, we strip the aging waterproof layer from the exposed section, so the wooden roof deck and older flashing can be inspected directly.
3. Repair damaged woodIf we find sections of decking that need replacement, we photograph the affected area and explain the added repair before the work proceeds to the waterproofing step.
4. Install new tile-compatible underlaymentWe install a compatible underlayment system below the saved tile and tie it into valleys and flashing at roof transitions.
5. Relay the tileOnce the waterproofing is complete, we return suitable original pieces to the roof and replace broken pieces as closely as current materials allow.

Homeowners in Liberty can call Courtland Roofing for tile-roof repairs, lift-and-relay underlayment replacement and full replacement, with the recommendation based on the condition of both the tile and waterproofing below.

Certified installer for GAF, CertainTeed and Owens Corning, family-owned, licensed & insured.

Courtland Roofing has worked on tile roofs in every part of Liberty, Utah (84310), and we would be glad to look at yours. We give homeowners across the rest of Weber County the same service, including in Ogden, Roy and North Ogden.

If you do not see your ZIP code listed, call or text us. We can confirm whether we provide clay and concrete tile roofing at your address in Liberty.