Clay and Concrete Tile Roof Repair and Replacement in South Weber, Utah

Clay and concrete tile can remain in service for many years because the visible pieces are hard, durable materials, but the waterproof layer underneath can wear out before the tile itself.

Median year built from the US Census American Community Survey; elevation from USGS.

A tile roof should be evaluated when tiles crack or slip, leaks recur, flashing loosens or valleys stop draining well, because we need to separate visible tile damage from a larger underlayment problem.

Wind can loosen or shift individual clay or concrete tiles in South Weber, especially near exposed roof edges, so secure attachment and prompt replacement of damaged pieces help keep the underlayment covered.

Flashing is especially important on a tile roof in South Weber because water can travel beneath the pieces toward walls, chimneys and other transitions, so those joints need integrated metal and underlayment details.

Long-term sun exposure affects the hidden materials of a tile roof differently from the visible tile, although heat still contributes to aging below the tile.

A tile roof combines durable clay or concrete pieces on the surface with waterproofing and metal details that protect the roof deck below.

• Clay tile: Clay tile is made from fired clay and handles long-term weather exposure well, but a sharp impact can still break an individual piece.
• Concrete tile: Concrete tile is a dense, heavy roofing material available in several profiles and colors, so structural suitability should be confirmed before installation.
• Underlayment: Underlayment sits below the tile and provides secondary water protection, and an older roof may need new underlayment even when much of the tile can be reused.
• Battens and attachment: Some tile systems use battens to support and position the tile, and the fastening details should follow the requirements of the selected system.
• Flashing and valleys: Flashing directs water around valleys, walls, chimneys and other roof transitions, and the metal needs to work with the underlayment rather than rely on surface sealant alone.

Tile-roof work can range from replacing one broken tile to completing a lift-and-relay underlayment replacement, so the proposed work matches the part of the roofing system that failed.

• Broken tile replacement: When damage is limited to one or two cracked pieces, we change the damaged pieces individually, and reusable original tile around the repair stays in place.
• Flashing repair and replacement: When flashing fails around walls and chimneys, we replace or rebuild the damaged flashing, so water cannot continue traveling beneath the tile at that location.
• Valley repair: For a leaking or poorly draining valley, we inspect the valley metal, underlayment and surrounding tile, so the repaired valley has a clear path toward the lower roof edge.
• Ridge and hip tile repair: When ridge or hip pieces become loose, we check the supporting detail before reinstalling the tile, and replacement pieces are matched as closely as availability allows.
• Lift-and-relay underlayment replacement: We carefully remove reusable tile and organize it for reinstallation, then inspect the roof deck and renew the waterproof layer underneath before broken pieces are replaced and usable tile is reinstalled.
• Full tile roof replacement: Full replacement makes sense when the existing tile is too damaged to reuse, and the replacement is built from the roof deck upward.

Which of these your roof needs comes out of the inspection. The tiles usually outlive everything else up there, so we would rather relay yours than sell you new ones.

For the full picture of the service, see Clay & Concrete Tile Roofing.

Lift-and-relay underlayment replacement preserves reusable tile while renewing the waterproof layer underneath, which lets us identify hidden moisture or wood damage before the tile returns.

1. Lift and organize the tileWe lift reusable tile in a controlled order, and unnecessary roof traffic is kept to a minimum.
2. Remove the old underlaymentAfter the tile is removed, we remove the aging underlayment, so hidden moisture, wood damage and failed details can be identified.
3. Repair damaged woodIf we find soft or deteriorated roof-deck wood, we document the condition and explain the replacement cost before installing new wood.
4. Install new tile-compatible underlaymentWe install tile-compatible underlayment over the prepared roof deck and integrate the flashing and valley details into the same water-control layer.
5. Relay the tileAfter the waterproofing is complete, we reinstall the reusable original tile, and keep unusable pieces out of the finished roof.

Courtland Roofing handles clay and concrete tile repair, underlayment replacement and full tile-roof replacement in South Weber, and we explain whether the problem is limited to one area or affects a larger part of the roof.

Certified installer for GAF, CertainTeed and Owens Corning, family-owned, licensed & insured.

Courtland Roofing has worked on tile roofs in every part of South Weber, Utah (84405), and we would be glad to look at yours. We give homeowners across the rest of Davis County the same service, including in North Salt Lake, Syracuse and Clinton.

If you do not see your ZIP code listed, call or text us. We can confirm whether we provide clay and concrete tile roofing at your address in South Weber.