Why Do Homeowners in Kearns Choose Asphalt Shingles?
Asphalt shingles work well on many Kearns homes because they combine a water-shedding surface with materials that can be installed on a wide range of residential roof slopes. The shingles overlap each other, the asphalt layer helps resist water, and the mineral granules on top protect the surface from sunlight and everyday weather exposure. The result is a roofing system that can be repaired in sections when the surrounding roof is still in good condition.
Median year built from the US Census American Community Survey; elevation from USGS.
How Do Asphalt Shingles Age on Kearns Homes?
The surface of an asphalt shingle changes as it ages. The mineral granules can loosen, the asphalt can become less flexible, and the adhesive strips that help neighboring shingles stay sealed can weaken. On a Kearns roof, those signs are more useful than color alone because they show whether the material is still flexible and secure enough to keep performing. Sun-facing slopes in Kearns can age faster because prolonged sunlight gradually wears the shingle surface and its protective granules.
When Should You Install a New Asphalt Shingle Roof in Kearns?
An asphalt shingle installation in Kearns makes sense when the existing roof has widespread wear that cannot be solved with one localized repair. We inspect the shingles, flashing, wooden roof deck, and previous repair areas before recommending replacement.
What Is an Asphalt Shingle Made Of?
An asphalt shingle is a layered roofing material. The visible surface is only part of the product. The main components work together to give the shingle strength, water resistance, color, and protection from sunlight.
- Fiberglass mat: The internal mat gives the shingle its basic shape and strength.
- Asphalt coating: The asphalt layer helps the shingle resist water and allows the material to remain flexible enough for roofing use.
- Mineral granules: The small granules on the surface protect the asphalt from sunlight and give the shingle its color and texture.
- Adhesive seal strip: The factory-applied adhesive helps neighboring shingles seal together after installation. A strong bond helps the roof resist wind lifting the shingle edges.
These parts are built into the shingle at the factory. The finished roof still depends on the underlayment, flashing, roof edges, ventilation, and installation underneath and around the shingles.
What Asphalt Shingle Options Do You Install in Kearns?
For most Kearns homes, architectural shingles are the starting point because they provide a thicker, dimensional roof surface and are available in a wide range of colors and product levels. Three-tab shingles remain an option when the project calls for a basic asphalt system. Impact-resistant products can also be considered where hail exposure or insurance requirements make them relevant. The exact warranty and performance ratings depend on the manufacturer and product selected.
What Does Asphalt Shingle Roofing Installation in Kearns Include?
A complete asphalt shingle installation in Kearns covers the roof surface and the details around it. That includes the wood below the shingles, protective membranes, underlayment, flashing, roof edges, vents, valleys, and the finished shingle field.
These are some of the installation details we focus on for Kearns homes:
- Protect vulnerable winter areas: We install waterproof protection in areas where melting snow and ice are more likely to work underneath the shingles, including appropriate lower roof edges and other vulnerable sections.
- Review attic ventilation: We check whether the attic has a reasonable path for air to enter and leave. If ventilation needs attention, we explain the issue as part of the roofing plan.
- Secure the shingles for wind exposure: We fasten the shingles according to the roofing system requirements and pay close attention to roof edges, ridges, and exposed slopes where wind can get underneath loose material.
- Seal roof penetrations: Vent pipes and other openings receive the appropriate flashing and seals so water can flow around the opening instead of into the attic.
- Inspect the wooden roof deck: After the old roofing is removed, we inspect the wood underneath. Soft or damaged sections are photographed and priced before additional decking work is completed.
- Install new flashing where needed: Flashing is the metal that directs water around chimneys, walls, vents, and other joints. We replace or rebuild flashing instead of depending on old metal or surface sealant.
- Build clear drainage paths: We install valleys and roof-edge details so rain and melting snow can move off the roof without being directed back toward the wood.
We review the installation scope before work begins. If removing the old roofing reveals damaged wood or another hidden condition, we photograph it and explain any additional work before proceeding.
For the full picture of the service, see Asphalt Shingle Roofing.
How Does Asphalt Shingle Roofing Installation in Kearns Work?
Roof installation in Kearns starts with preparation rather than shingles. We protect the property, remove the old roofing, inspect the wood, rebuild the water-control details, and only then install the new asphalt shingle surface.
- Start with the roof underneathOnce the old roofing is removed, we inspect the wooden roof deck and any hidden conditions that could affect the new installation.
- Install water-control detailsWe complete the underlayment, waterproof membranes, valleys, flashing, and roof edges before the main shingle field covers them.
- Install the asphalt shinglesWe lay out and fasten the shingles so the courses overlap correctly and the roof sheds water as a complete surface.
- Complete roof openings and ridgesWe finish vents, walls, chimneys, skylights, ridges, and other areas where separate roofing components meet.
- Document the completed roofWe photograph key stages and the finished installation so you have a record of the work.
Who Installs Asphalt Shingle Roofs in Kearns?
Courtland Roofing installs complete asphalt shingle roofing systems in Kearns. We inspect the roof, prepare the wooden roof deck, install the protective layers and flashing, and complete the shingle surface as one system.
Certified installer for GAF, CertainTeed and Owens Corning, family-owned, licensed & insured.Where in Kearns Does Courtland Roofing Install Asphalt Shingle Roofs?
Courtland Roofing has installed asphalt shingle roofs in every part of Kearns, Utah (84118), and we would be glad to look at yours. We give homeowners across the rest of Salt Lake County the same service, including in South Salt Lake, Millcreek and Bluffdale.
If you do not see your ZIP code listed, call or text us. We can confirm whether we provide asphalt shingle roofing at your address in Kearns.
Free Kearns Asphalt Shingle Roof Evaluation
A written quote, a shingle recommendation for your exposure, and an honest answer on whether you need a new roof yet.
Common Questions About Asphalt Shingle Roofing in Kearns
What do the granules on asphalt shingles do?
The mineral granules protect the asphalt surface from sunlight and physical wear. They also create the shingle's color and texture. Some loose granules are normal, but widespread bare areas can be a sign that the shingles are aging.
What is the difference between architectural and three-tab shingles?
Three-tab shingles have a flatter and more uniform appearance. Architectural shingles use a thicker laminated construction that creates more dimension across the roof. Published wind ratings, warranty options, and other specifications vary by product, so we compare the exact products before installation.
How do I choose asphalt shingles for a Kearns home?
Color and appearance matter, but the shingle is only one part of the roofing system. We also look at roof slope, exposure, ventilation, flashing, underlayment, and the details needed for the property.
Will the new roof include new flashing?
We inspect the existing flashing and replace or rebuild flashing where needed as part of the approved roofing scope. Flashing is important because it directs water around chimneys, walls, vents, and other roof joints.
Do you inspect the attic before installing the roof?
When access is available, attic conditions can help us identify ventilation or moisture issues that should be considered before or during the roofing project.